Measuring Tools Tape Measure

Measuring Tools Tape Measure

A, tape measure how to see the scale
1, ready tape measure a, we pay attention to the tape measure above the switch button, is closed.
2, open the switch, we can pull the ruler at will, stretch, shrink active.
3, the tape measure of 0 scale pair tightly against one end of the object, and then manual hardware tool manufacturers staff adhere to parallel with the object, pull the ruler to the other end of the object, and tightly against this end, the most buckle off the closed switch.
4, the field of view and the scale on the tape measure, adhere to the straight, read the data. Record it.
5, open the switch, retract the tape measure, close the switch and put it back in place.

Second, what is the measurement of the tape measure
Tape measure head is loose, so that we can measure the scale, tape measure scale, there are two kinds of measurement. One is hanging on the object, one is the top to the object. The difference between the two methods is the thickness of the iron on the head of the tape measure. The purpose of the tape measure head is to compensate for the thickness of the iron on the head of the tape measure when it is placed on top of the object.
The figures on the tape measure are divided into two rows, one row of digital units is centimetres / CM, a row of units is inches, 1 CM about = 0.3937 inches, 1 inch about = 2.54 CM, so the two figures are shorter than the digital unit is centimetres, the longer for inches, the unit centimetres of digital font is also smaller than inches, 100 cm = 1 m, the use of general use of the unit is centimetres.
Retour au blog